Gates & Gate Repair in Chattanooga, TN
A gate takes more abuse than any other part of a fence — it swings, it gets slammed, it carries its own weight on one side. KV-PRO builds custom gates that are framed to stay square, and repairs the sagging, sticking, or broken gates that are already giving you trouble.
What's Included
- Custom gate framing and build, matched to your fence style — wood or aluminum
- Hinges, latches, and drop rods chosen for the gate's weight and use
- Diagonal bracing to keep a gate square and prevent sag over time
- Self-closing hinges where you want the gate to close on its own
- Repair of existing gates — re-hanging, re-squaring, hardware replacement
Types & Options
Custom Wood Gates
Built to match the fence — board-on-board, picket, or privacy style — with internal bracing so the gate stays square instead of sagging under its own weight the way a lot of pre-hung gates do.
Aluminum Gates
Matched to an ornamental aluminum fence line, with black powder-coated hardware for a clean, finished look that holds up outdoors.
Gate Repair
Sagging, sticking, or won't-latch gates are almost always a hinge, hardware, or square problem, not a reason to replace the whole gate.
See This Work
What It Costs
Gate cost depends mostly on size and hardware. Send a few photos of the opening or the gate that's giving you trouble, and after a free on-site visit you'll get a clear quote. Here's what actually drives it:
- Gate width and height
- Wood versus aluminum construction
- Hardware grade — standard hinges/latch vs. self-closing or heavy-duty hardware
- Whether it's a repair to existing posts or a full new gate with new posts
Our Process
- 1
Send your project details
Text or use the estimate form to describe the job, and send a few photos of the opening or the existing gate.
- 2
Free on-site estimate
Konstantine looks at the opening, the fence it needs to match, and how the gate will actually be used.
- 3
Clear quote
A clear quote covering the gate build or repair and the hardware needed.
- 4
Build or repair
The gate is framed square and braced, or the existing gate is re-hung with new hardware.
- 5
Adjust and test
Konstantine checks that the gate swings, latches, and closes cleanly before calling the job done.
Frequently Asked Questions
Why does my gate sag over time?
Most gate sag comes from the gate racking out of square as the hardware side carries the full weight of the panel. A gate built with a diagonal brace, and hung on hinges sized for its weight, resists this far better than a plain panel with a couple of hinges screwed on.
Can you build a gate to match my existing fence?
Yes — Konstantine will match board style, spacing, and cap details so the gate reads as part of the fence, not an add-on.
Do you install self-closing hinges?
Yes, for pet containment or anywhere you want the gate to close on its own.
My gate won't latch anymore — is that a quick fix?
Often, yes. A gate that won't latch is usually a hinge or hardware adjustment rather than a rebuild. Send a photo and Konstantine can usually tell you what's going on. Keep in mind the minimum job is generally about 3–4 hours of work, so a small gate fix is often best combined with other fence or wood repairs.
Areas We Serve
KV-PRO is based in Chattanooga (37403) and serves the surrounding area, including Hixson, Red Bank, East Ridge, East Brainerd, Signal Mountain, Ooltewah, and Lookout Mountain. See the full service area list.
Get a Free Estimate — Text Today.
Send your project type, a short description, and a few photos. Clean. Straight. Built Right.
Prefer to talk? Call 904-293-7952 — if Konstantine can't pick up, he'll call you back. Mon–Fri, 8 AM–4 PM.